/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : readme.txt
* Author             : MCD Application Team
* Version            : V2.2.0
* Date               : 06/13/2008
* Description        : Description of the USB Audio_Speaker Demo.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
The USB Audio Speaker demo gives examples of how to use the STM32F103BT6 USB
peripheral to communicate with the PC host in the isochronous transfer mode.
It provides a demonstration of the correct method for configuring an isochronous
endpoint, receiving or transmitting data from/to the host.

More details about this Demo implementation is given in the User manual 
"UM0424 STM32F10xxx USB development kit", available for download from the ST
microcontrollers website: www.st.com/stm32


Directory contents
==================
 + \include: contains the Demo firmware header files
 + \project: contains pre-configured projects for RVMDK, EWARM5, RIDE toolchains
 + \source: contains the Demo firmware source files


Hardware environment
====================
This example runs on "ET-STM32F103(RBT6)" Board + "ET-MINI AUDIO OUT" Board
Connect PB8 to "ET-MINI AUDIO OUT" For Test Sound

    
How to use it
=============
 + RVMDK
    - Open the AudioSpeaker.Uv2 project
    - In the build toolbar select the project config:
        - ET-STM32F103 : to configure the project 
    - Rebuild all files: Project->Rebuild all target files
    - Load project image: Debug->Start/Stop Debug Session
    - Run program: Debug->Run (F5)    

 + EWARM5
    - Open the AudioSpeaker.eww workspace.
    - In the workspace toolbar select the project config:
        - ET-STM32F103 : to configure the project
    - Rebuild all files: Project->Rebuild all
    - Load project image: Project->Debug
    - Run program: Debug->Go(F5)

 + RIDE
    - Open the AudioSpeaker.rprj project.
    - In the configuration toolbar(Project->properties) select the project config:
       - ET-STM32F103 : to configure the project
    - Rebuild all files: Project->build project
    - Load project image: Debug->start(ctrl+D)
    - Run program: Debug->Run(ctrl+F9)  

******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
